Calculate capacitor energy and RC time constant with Glofell's online calculator. Enter voltage, capacitance, and optional resistance to see stored energy and charge/discharge behavior.
E = V^2*C/2
Energy stored in the capacitor (Joules)
TC = R*C
RC time constant (seconds)
1/e = 36.8%
Remaining value after one time constant (discharging)
Introduction
This tool allows you to calculate the Time Constant () and the Stored Energy () of a capacitor in an RC circuit.
What is the Time Constant? The Time Constant (represented by the Greek letter Tau, ) is a measure of how quickly a capacitor charges or discharges through a resistor. A capacitor cannot change its voltage instantly; the series resistor limits the current, creating a time delay.
The Formula: The transient response time is measured in seconds:
Where:
Key Rule: It takes exactly 5 Time Constants () for a capacitor to be considered "fully charged" (reaching ~99.3% of source voltage) or "fully discharged" (dropping to ~0.7%).
The behavior of Voltage and Current differs depending on whether the capacitor is charging or discharging.
When connected to a DC supply, the capacitor voltage increases while the charging current decreases.
| Time Constant | Calculation | Capacitor Voltage () | Circuit Current () |
|---|---|---|---|
| 0.5 |
When the source is removed and the capacitor discharges through a resistor, both voltage and current decrease over time.
| Time Constant | Calculation | Capacitor Voltage () | Discharge Current () |
|---|---|---|---|
| 0.5 |
What is Capacitor Energy? A capacitor stores potential energy in the electric field created between its plates. Unlike a battery, which stores energy chemically, a capacitor stores energy electrostatically.
The Energy Formula: The energy stored is half the product of the charge and the voltage. The standard formula is:
Where:
Alternative Formulas: Using the relationship , we can express energy in three ways:
While capacitors store Joules, large-scale electrical consumption (like household appliances) is often calculated in Kilowatt-hours (kWh).
Formula:
Note: To convert Watts to Kilowatts, divide by 1,000. To convert Seconds to Hours, divide by 3,600.
| 39.3% |
| 60.7% |
| 0.7 | 50.3% | 49.7% |
| 1.0 | 63.2% | 36.8% |
| 2.0 | 86.5% | 13.5% |
| 3.0 | 95.0% | 5.0% |
| 4.0 | 98.2% | 1.8% |
| 5.0 | 99.3% (Full) | 0.7% (Zero) |
| 60.7% |
| 60.7% |
| 0.7 | 49.7% | 49.7% |
| 1.0 | 36.8% | 36.8% |
| 2.0 | 13.5% | 13.5% |
| 3.0 | 5.0% | 5.0% |
| 4.0 | 1.8% | 1.8% |
| 5.0 | 0.7% (Empty) | 0.7% (Zero) |
Use the formula E = ½ × C × V², where C is capacitance in farads and V is voltage in volts. The energy result is given in joules. Resistance is not used in this calculation.
The time constant (τ = R × C) indicates how quickly a capacitor charges or discharges. It is the time to reach 63.2% of the final voltage during charging, or to drop to 36.8% during discharging. After five time constants, the capacitor is effectively fully charged or discharged.
Enter voltage in volts (V), capacitance in microfarads (µF), and resistance in ohms (Ω). The tool returns energy in joules (J) and the time constant in seconds (s).
Because stored energy depends only on voltage and capacitance, resistance is not needed for the energy result. Resistance is required solely to compute the RC time constant.
Higher resistance increases the time constant, making the capacitor charge and discharge more slowly. The exponential curves in the charging/discharging table illustrate how voltage and current change over time.
Resistor Color Code Calculator
Glofell’s Resistor Color Code Calculator decodes 4-band, 5-band, and 6-band resistors. Select each band to identify resistance, tolerance, and power rating for circuit work, repairs, or lab sorting.
Ohms Law Calculator
Glofell’s Ohm’s Law Calculator helps engineers and students quickly solve for voltage, current, resistance, and power. Provide any two known values to calculate the remaining parameters, making it a practical reference for circuit design, troubleshooting, and electronics learning.
Op-Amp Voltage and Gain Calculator
Calculate output voltage together with inverting and non-inverting gain for operational-amplifier circuits. Enter V1, V2, Vp, Vn, and resistor values R1 through R4 to obtain accurate results for circuit design, troubleshooting, and op-amp learning.
Inverting Op-Amp Resistor Calculator
Analyze an inverting operational-amplifier circuit by entering the desired gain, output voltage (Vout), R1 resistance, and input voltages V1, V2, Vp, and Vn. The calculator automatically determines the required R2, R3, and R4 resistor values, helping you design and verify inverting op-amp configurations.









